Crease Pattern Challenge 067

Crease Pattern Challenge, Origami

This is an odd one. Challenge #67 is a Steam Automobile by Morisue Kei. The crease pattern gives this:

OTMCP_067 - STEAM AUTOMOBILE - MORISUE (102) OTMCP_067 - STEAM AUTOMOBILE - MORISUE (103)

And that’s as far as I went. This isn’t one of those I get annoyed at where it’s only made difficult because it’s in crease pattern. It seems like a crease pattern was the way to go, at least initially. This one needs something more to get it from the crease pattern to the finished model. Many of the lines in the finished model (like exactly where the wheels sink, the vertical and horizontal seat line locations, etc.) are not in the crease pattern and must be guessed at, meaning it’s not very consistent. It’s a good crease pattern (any more info would be a mess), but it needs something like additional diagrams to finish it.

Grey Rabbit

Origami, Original Designs

I came up with a model I call “Grey Rabbit”. As you can see, it doesn’t have to be grey, that’s just the name. It is a rabbit though.

WKO_050 - GREY RABBIT (105)

I decided to try and make diagrams for this one. I think they’re understandable, but I wrote them. So I’m hoping someone will fold one and show me what they got or let me know about something that’s not clear. The diagram images are bigger than I usually put on here, but hopefully they’ll still upload alright.

directions_new

diagrams read right to left

grey_rabbit_01

grey_rabbit_02

grey_rabbit_03

grey_rabbit_04

grey_rabbit_05

grey_rabbit_06

WKO_050 - GREY RABBIT (106)

Phoenix 3.0 and Ryujin 3.1

Miscellaneous, Origami

I found a Phoenix 3.0 I made from the crease pattern on Satoshi Kamiya’s website, and it looks pretty good. I thought a Ryujin would go well with it. The only one I hadn’t made was the 3.1, so I thought I’d try that.

KAMIYA - RYUJIN PHOENIX (104)

The 2.1 crease pattern is on his website, and the 3.5 is in the Super Complex book. I found the 3.1’s crease pattern on the internet. It seems to be off of a card from one of his exhibitions (he has cards under the model with the title and it sometimes has the crease pattern on it). So I’m not 100% sure about it, but it’s a lot like the 3.5 and was fun either way.

KAMIYA - RYUJIN PHOENIX (105)KAMIYA - RYUJIN PHOENIX (106)KAMIYA - RYUJIN PHOENIX (107)

I think they look neat together.

KAMIYA - RYUJIN PHOENIX (101)

Crease Pattern Challenge 066

Crease Pattern Challenge, Origami

Challenge #66 is Takashi Kanazawa’s Bambiraptor. Dinosaur origami is great, and this one has feathers to be more historically accurate. It’s a really good one; kind of reminds me of some of Satoshi Kamiya’s dinosaurs.

OTMCP_066 - BAMBIRAPTOR - KANAZAWA (101) OTMCP_066 - BAMBIRAPTOR - KANAZAWA (102)

OTMCP_066 - BAMBIRAPTOR - KANAZAWA (104) OTMCP_066 - BAMBIRAPTOR - KANAZAWA (106)

I had trouble getting pictures of this one right and later lost the first model. The first shot of the new one was odd too.

OTMCP_066 - BAMBIRAPTOR - KANAZAWA (114) OTMCP_066 - BAMBIRAPTOR - KANAZAWA (115)

I used a wire to hold him up. Also, apparently people use methyl cellulose (used in bookbinding) to stiffen origami, and I tried that for the first time with this one.

OTMCP_066 - BAMBIRAPTOR - KANAZAWA (117) OTMCP_066 - BAMBIRAPTOR - KANAZAWA (118)

OTMCP_066 - BAMBIRAPTOR - KANAZAWA (116) OTMCP_066 - BAMBIRAPTOR - KANAZAWA (112)

Archdemon, Belial, & Dessert Demon

Origami, Original Designs

Here’s another origami Dragon Quest monster. Nearly all of Dragon Quest’s monsters are designed by Akira Toriyama, the guy who did Dragonball. I thought now would be a good time for another DQ monster, Archdemon, with the E3 having DQXI on Switch and the Hero(es) from DQ games coming to smash.

WKO_044 - ARCHDEMON (105)

WKO_044 - ARCHDEMON (115) WKO_044 - ARCHDEMON (106)

WKO_044 - ARCHDEMON (112) WKO_044 - ARCHDEMON (113)

This is one of the ones I painted after the folding. The images above are before the detail painting, and you can see there’s colour switch around the nose.

WKO_044 - ARCHDEMON (130) WKO_044 - ARCHDEMON (131)

One of the paints I used was new and didn’t dry as quickly as the others. I painted the wings with it, thought I let it dry enough, then refolded the wings to make sure they didn’t lose the shape. I had to unfold to paint more, but the paint fused the wing and it ended up tearing. I grafted a new wing on him after this.

WKO_044 - ARCHDEMON (164) WKO_044 - ARCHDEMON (160)

WKO_044 - ARCHDEMON (150) WKO_044 - ARCHDEMON (153)

I did the pallet swap monsters Belial and Dessert Demon too. I also made them their weapons in smaller squares.

WKO_044 - ARCHDEMON (147) WKO_044 - ARCHDEMON (148)

WKO_044 - ARCHDEMON (101) WKO_044 - ARCHDEMON (132)

WKO_044 - ARCHDEMON (165) WKO_044 - ARCHDEMON (167)

WKO_044 - ARCHDEMON (170) WKO_044 - ARCHDEMON (171)

WKO_044 - ARCHDEMON (173) WKO_044 - ARCHDEMON (174)

WKO_044 - ARCHDEMON (140) WKO_044 - ARCHDEMON (142)

WKO_044 - ARCHDEMON (143) WKO_044 - ARCHDEMON (144)

WKO_044 - ARCHDEMON (145) WKO_044 - ARCHDEMON (178)

WKO_044 - ARCHDEMON (136)

Crease Pattern Challenge 065

Crease Pattern Challenge, Origami

Crease Pattern Challenge #65 in Origami Tanteidan Magazine Issue 121 is Naoki Takeda’s Tengu. This is probably my favourite Crease Pattern Challenge, at least so far. It’s sort of complex, but I’ve made it a few times.

OTMCP_065 - TENGU - TAKEDA (105) OTMCP_065 - TENGU - TAKEDA (101)

Tengu are Japanese monster-demon-things that range from goblins to bird men (frequently crows). Probably the most common version is a man with a long nose (or even beak) with wings, like this one. But this model has a whole kimono, as well as fans, tengu geta, bushy eyebrows, and a beard.

OTMCP_065 - TENGU - TAKEDA (108) OTMCP_065 - TENGU - TAKEDA (104)

OTMCP_065 - TENGU - TAKEDA (106) OTMCP_065 - TENGU - TAKEDA (107)

There are a few things different in mine than the final model shown in Tanteidan. The head looks a bit different and the fans are squished and spread a bit earlier to give the impression of hands. These I don’t know if I could get to look that good with the size of paper I used. The end model has pleating in the wings. I guess I just like how the wings look without the pleats. Another thing I’m not sure about why are the flaps at the sides of the kimono. I’m not sure if I’m messing something up or like it that way when I make them.

OTMCP_065 - TENGU - TAKEDA (109) OTMCP_065 - TENGU - TAKEDA (111)

Anyway, it’s an absolutely amazing model.

OTMCP_065 - TENGU - TAKEDA (103)

Crease Pattern Challenge 064

Crease Pattern Challenge, Origami

Challenge #64 is Jason Ku’s Bicycle v1.8. I feel like this is one of those more academic models, showing techniques for making wheels and bars that you might not think would be possible from a square of paper.

OTMCP_064 - BICYCLE V1-8 - KU (103) OTMCP_064 - BICYCLE V1-8 - KU (102)

The bars that form a “V” lightly lock in to the lower horizontal bar, but they keep coming loose in mine. The most prominent feature is the wheels, but it has a seat, handlebars, pedals, and a kickstand.

OTMCP_064 - BICYCLE V1-8 - KU (106) OTMCP_064 - BICYCLE V1-8 - KU (109)

OTMCP_064 - BICYCLE V1-8 - KU (110) OTMCP_064 - BICYCLE V1-8 - KU (101)

I don’t really find a bicycle an “exciting” origami model, but it’s really fascinating that it can be made from a flat square without cutting it.

Crease Pattern Challenge 063

Crease Pattern Challenge, Origami

Tanteidan’s Crease Pattern Challenge #63 is Hoang Tien Quyet’s Fox. It’s a very stylized model with a crease pattern that isn’t as simple as it looks. It’s very elegant, and it’s one of these models I’ve made a few times before. This time, I found some of the older ones.

OTMCP_063 - FOX - QUYET (106) OTMCP_063 - FOX - QUYET (102)

OTMCP_063 - FOX - QUYET (108) OTMCP_063 - FOX - QUYET (109)

Here are three foxes, with one out of store origami paper. They all ended up with different faces.

OTMCP_063 - FOX - QUYET (110) OTMCP_063 - FOX - QUYET (111)

OTMCP_063 - FOX - QUYET (112) OTMCP_063 - FOX - QUYET (116)

I should probably look into wet folding techniques (I use water sometimes, but it’s not the same), because these would look even better with more developed curves. The sharpness in these ones looks pretty good to tho.

OTMCP_063 - FOX - QUYET (105)

Crease Pattern Challenge 062

Crease Pattern Challenge, Origami

I’ve sort of been putting this one off because I’ve had so much trouble with it. Challenge #62 is Ushio Ikegami’s Kepler’s Star.

OTMCP_061 - KEPLERS STAR - IKEGAMI (104)

There aren’t a lot of pictures with this (it looks mostly the same from all directions). While there are some flips and stacks (that is, folds through multiple parts together that show up as different polarities on the pattern) that are usually better done in diagrams, I think this would be difficult to do other than in a crease pattern.

OTMCP_061 - KEPLERS STAR - IKEGAMI (106)

I figured out reference points and put the pattern on a big square then cut to hexagon, but I used the thin paper I always use. This was too thin to work well. I tried to stiffen it up, but that was too much. So I finally copied the pattern on regular paper and folded that.

OTMCP_061 - KEPLERS STAR - IKEGAMI (102)

One of the pyramids would be a different colour with reverse colour paper. I put dots on it to kind of illustrate that.

OTMCP_061 - KEPLERS STAR - IKEGAMI (105)

This is an interesting model, as it takes a modular model and makes it with a single sheet.